Logo
 
 

2011

 

CASPA Alliance: Coombabah

 

The purpose of this project is to provide the installation of all buried piping requirements for the Coombabah Wastewater Treatment Plant Stage 5 Upgrade. The piping is of various sizes for water, sewer, and electrical infrastructure around the Coombabah Wastewater Treatment Plant.

 

The scope of works includes, but is not limited to, the following:

  • Installation of piping in accordance with drawings and specifications
  • Planning and coordination of survey requirements with the site team. Set-out from benchmarks and set-out points provided by our site survey personnel
  • Temporary trench support where required
  • Allowance for safe access to trenches due to inspections and placement of concrete
  • Allowance to form/box and place thrust blocks on all horizontal and vertical changes in direction
  • Allow to cut into manholes where required and box/pour penetrations as per drawings
  • Allow to set up and support all cast in spools associated with the contract
  • Install pipe supports and provide concrete plinths as per drawings
  • Management of imported materials from designated delivery point on site
  • Cart and stockpile excess/surplus materials to stockpile area
  • Allowance for tie-ins to existing/operational plant outside of normal business hours
  • Pressure testing of installed piping in accordance with drawings and specifications and AS/NZS 2566.2

Last updated: 25/10/2011


 
IMG00869-20110809-071.jpg

CASPA Queensland

 
IMG00872-20110809-071.jpg

CASPA Queensland

 
IMG00880-20110811-091.jpg

CASPA Queensland

 
IMG00882-20110811-091.jpg

CASPA Queensland

 

 

 
IMG00890-20110811-111.jpg

CASPA Alliance - Coombabah

 
IMG00900-20110811-141.jpg

CASPA Queensland

 
IMG00901-20110811-141.jpg

CASPA Alliance - Coombabah

 
IMG00907-20110811-141.jpg

CASPA Queensland

 
 
IMG00890-20110811-111.jpg

CASPA Alliance - Coombabah

 
IMG00901-20110811-141.jpg

CASPA Alliance - Coombabah

 
IMG00913-20110816-111.jpg

CASPA Alliance - Coombabah

 
IMG00940-20110822-081.jpg

CASPA Queensland

 
 
IMG00935-20110818-161.jpg

CASPA Queensland

 
IMG00934-20110818-141.jpg

CASPA Queensland

 
IMG00932-20110818-141.jpg

CASPA Queensland

 
IMG00925-20110817-091.jpg

CASPA Queensland

 
 
IMG00918-20110816-121.jpg

CASPA Queensland

 
IMG00921-20110817-081.jpg

CASPA Queensland

 
IMG00914-20110816-111.jpg

CASPA Queensland

 
IMG00913-20110816-111.jpg

CASPA Alliance - Coombabah

 

2011

 

John Holland - Bulimba Creek, Queensland

 

The project involves installing 13 metre deep bore hole at Bulimba Creek, Queensland. The works will involve:

  • Excavating 13 metre deep bore holes for microtunneling contractor
  • Crane lifting in a small excavator to trim the edges
  • Installing the shoring boxes and making safe

Last updated: 25/10/2011


 
Picture017.jpg

John Holland - Bulimba Creek, QLD

 
Picture018.jpg
 
Picture015.jpg

John Holland - Bulimba Creek, QLD

 
 
Home  |   Killard Exacavation - About Us   |   Killard Excavation - Water Projects   |   Killard Excavation - Sewer Projects   |   Killard - Electrical Projects   |   Killard Excavation - Gallery   |   Killard - Social Responsibility
  Killard - Stakeholder Feedback   |   Killard - Certifications & Policies   |   Killard - Current Insurances   |   Killard Excavation - Mardi Mangrove   |   Killard Excavation - Nuwarra Road   |   Killard Excavation - Freemans Reach
  Killard Excavation - Queensland   |   Killard Excavation - M2C Canberra   |   Killard Excavation - NWGC   |   Contact
self-updatable website design by havealook