Killard Excavations | M2C Canberra

Killard Excavation - M2C Canberra

This project involved pipe laying, including excavation to design levels, bed, lay, surround, and backfill the pipework. Pipe laying included 1404 MSCL Sintakote pipe, DN960 DICL mains and DN1200 to 450 RCP stormwater overflow. Works for lead in and outlet pipework for new Cottor Dam pump station.

This project also involved the installation of electrical conduits, including the excavation of pre-cast pits, concrete encasement, concrete bedding, thrust blocks, trench stops, bulkheads for pipeline, the installation of temporary structures, and the installation and maintenance of environmental controls.

Water main laying to Australian Water standards.

Last updated: 28/7/2011

M2C Cotter Dam Pipe Installation. Included multiple SINTAKOTE Water Main welded pipe laying through rock.


Pipe Laying at M2C Project in Canberra


Welding branches on DN1404 OD MSCL


Installing branch line Canberra


Installed branch line Canberra

Electrical Conduits installed on M2C Project in Canberra, Australia.


Canberra crane


Murrumbidgee Pump Station pipework


Murrumbidgee Pump Station conduit run

Laying Water Main Pipes from Balance Tank.


Canberra


M2C Cotter Dam Project, Canberra. DN960


Sintakote Pipe Canberra


Canberra Sintakote Pipe

Bend down towards Valve Station 6, where Sintakote Pipe Installed towards Murrumbidgee River. Pipelaying of multiple Water Main continued down steep embankment towards River Bank.


Canberra


Canberra


Canberra

Pipe Laying Sintakote Pipe on Cotter Dam Project, M2C in Canberra, Australia

Sintakote Main Laying at M2C in Canberra, Australia


Murrumbidgee River